Order the labels
This new label does not require premixing of the template DNA with the primer. So all you need to put in the tube is 5µl of
50ng/µl purified DNA. If you are going to use any of our universal primers, all you need to prepare is just this
sample with the name of the sequencing primer to be used indicated on top of the tube.
(We send you a separate label for this.)
If you want to use your customized primer which is not in the list of our universal primers (you can find the list on the other side of this paper), you should send the primer in a separate tube along with the DNA samples. The amount should be 2µl of 5pmole/µl(5uM) per reaction, but we recommend you to put enough amount of primer - about 20% more than our
Plasmid: 100ng/µl (over 15kb not allowed), Minimum volume of 20µl
- Over 700bp: higher than 50ng/ul
- 300bp~700bp: 25-50ng/ul
- Less than 300bp: 10-15ng/µl
Volume: at least 20µl
- Over 700bp: higher than 70ng/µl
- 300bp~700bp: 50ng/µl
- Less than 300bp: 20-25ng/µl
You will receive two different types of labels. These two labels should be attached to each tube; The larger bottom part of the label is attached to on the side wall of tube (just like EZ-seq labels), and the other round label on top of the tube.
If you have specified the name of primers that you want to use when you made the order for labels, the names of primer shall be already printed on them. Otherwise you will receive blank labels, then please write down the name of the primer. If you want to use your own custom primer, please also write the primer name onto the label which you attach to the top of the primer tube.
Please send your samples to our lab in Amsterdam. You may use our free sample pick-up service if it is
available nearby, or use our free courier account number. The address to which the samples should be sent is :
That's it. Very simple!